Virgin/HDPE/LDPE/LLDPE/PP Resin/Granules/Pellets
LDPE Injection Grade
Tests |
Value |
Unit |
Melt Flow Rate (MFR) |
15 |
g/10min |
Density |
0.922 |
g/cm3 |
Tensile Yield Strength |
7 |
Mpa |
Elongation at Break |
75 |
% |
Wien Softening Point |
85 |
°C |
Packing |
In 25 kg PP woven bags,20MT/20’FCL |
|
LDPE film grade
Tests |
Value |
Unit |
Melt Flow Rate (MFR) |
2 |
g/10min |
Density |
0.9225 |
g/cm3 |
Tensile Strength |
9 |
Mpa |
Elongation at Break |
500 |
% |
Fish eye max(0.3-2mm) |
30 |
n/1200cm2 |
Stripes |
20 |
cm/20m3 |
Packing |
In 25 kg PP woven bags,20MT/20’FCL |
|
Application: Packing film, net, cord; General purpose and industrial purpose, bottle, box; Agricultural irrigation pipe, hot water pipe; Greenhouse film goods bag; Burrier drainage pipe; PE pipe; For agricultural film, shrinkable film; all kinds of packaging bag; Injection molding, cast film; etc. Film Grade HDPE
Property |
Unit |
Typical Value |
Mass density |
g/cm 3 |
0.941-0.959 |
Melt flow Rate(190 centidegree /2.16kg) |
g/10min |
≤1.0 |
Tensile yield strength |
MPa |
≥19.0 |
Flexural modulus |
Mpa |
≥965 |
Elongation@ break |
% |
≥400 |
Impact Embrittlement temperature |
centidegree |
MAX -118 |
Dielectric Constant |
100KHZ |
2.32 |
1MHZ |
2.31 |
|
Loss Tangent |
100KHZ |
MAX 0.0001 |
1MHZ |
MAX 0.0001 |
|
Volume resistivity |
OHM-CM |
MIN 1x10 15 |
Application |
Mainly used for the production of shopping bag, food bags, etc. |
|
Related products
-
Read more
Copper(Cu), %
15.0 Min
Lead(Pb), %
5.00 Max
Cadmium(Cd), %
0.05 Max
Mercury(Hg), %
0.01 Max
Flourine(F), %
0.10 Max
Arsenic(As), %
0.50 Max
Moisture(H2O), %
5.0 Max
Size
0-100mm
Features:
-
Odorless
-
High density
-
Effectiveness
General specifications of copper ore DETERMINATION (mass%) Copper 40.01% Total iron as Fe 21.60% Silicon as Si0 20.24% Total Sulphur as S 17.10% Zinc as Zn 0.01% Moisture or 105 C 1.14%
-
